User Manual
Lubrigun Pumps 50:1
7.3A-38010-C05
Page 2 of 22
Subject to change
LINCOLN GmbH & Co. KG
∗
Postfach 1263
∗
D-69183 Walldorf
∗
Fax + (49) 6227 33259 ∗ Tel + (49) 6227 330
1. Foreword
This User Manual is intended to familiarize the user
with the pump/equipment and its designated use.
The operating instructions contain important
information on how to operate the pump/equipment
safely, properly and most efficiently. Observing these
instructions helps to prevent danger , to reduce repair
costs and downtimes and to increase the reliability and
life of the pump/equipment.
The Manual has to be supplemented by the
respective national rules and regulations for accident
prevention and environmental protection.
The Manual must always be available wherever the
pump/equipment is in use.
Table of contents
If persons being involved in handling/operating the
pump/equipment are not fluent in English, it is the user’s
responsibility making sure that personnel comprehends
the contents of this Manual, particularly the Instructions
and Warnings, prior to operating this pump/equipment.
This Manual must be read and applied by any
person in charge of carrying out work with the
pump/equipment, such as
• Operation including setting up, troubleshooting in
the course of the work, evacuation of production waste,
care and disposal of consumables.
• Maintenance
(servicing, inspection, repair)
and/or transport
Section Contents Page
1. Foreword 2
2. Safety instructions 3-5
2.1 Safety instructions, general, for pumps and pump units 3-4
2.2 Safety instructions, specific, for air operated pumps 4-5
3. Specifications of the product 6-10
3.1 Designated use 6
3.2 General description 7
3.3 Technical data 7
3.4 General dimensions 8
3.5 Operation guidance 9-10
4. Erection & Installation 11
4.1 Safety instructions 11
4.2 Tools required 11
4.3 Erection 11
4.4 Installation, general information 11
5. Operation 12-15
5.1 Setting-up for operation 12
5.2 Initial operation 12-13
5.3 Standard operation 13-14
5.4 Inspection & maintenance 14
5.5 Preventative maintenance 14
5.6 Troubleshooting 14-15
6. Service 16-18
6.1 Tools required 16
6.2 Disassembly procedure & repair 16-18
Addendum
Service parts drawing (3) 19-20
Service parts list 21-22
Note
For additional information,
refer to instructions of machine manufacturer.
To Next Page
Loading...
