53
9. Maintenance
Proper operation of the Lindab PC 410 requires regular
maintenance.
9.1 Maintenance work
Interval Maintenance work
If required (user) Clean the device with a wet
cloth and a smooth cleanser.
Once a year (factory) Send the device to one of our
service points for checking and
calibration.
10. Warranty and Service
10.1 Warranty Each Lindab PC 410 probe will be tested in all functions and
will leave our factory only after extensive quality control tes-
ting. The final control will be recorded in detail in a test report
and delivered with any unit.
If used properly, the warranty period for the Lin-dab PC 410
will be twelve month from the date of sale. Not covered by
the warranty are batteries and defects of the pressure sensor
caused by overpressure.
This warranty does not cover the freight and packing costs
when the device is sent to the factory for repair.
Service by non authorized personnel or making modifications
to the analyzer voids any warranty.
To Next Page
Loading...