Servicing 5
Inspection and maintenance as required
Changing wheels
WARNING
Take weight of truck into account.
Only use jacks with a lifting capacity of min. 3600
kg.
CAUTION
When using wheels that are not anti-static give
consideration to anti-static belt.
When changing wheels that are not anti-static the
truck must be equipped with an anti-static belt as
these wheels are not electroconductive .
The anti-static belt must always be in contact with
the floor.
Please contact your authorised dealer.
Changing wheels at front
¾ Extend lift mast to first level and secure.
e3861396
1
¾ Release all wheel fastenings (1) of relevant
wheel.
Operating Instructions – 386 807 1001 EN – 03/2006 101
To Next Page
Loading...
