Servicing 5
Inspection and maintenance every 3000 operating hours or every 2 years
Check wheel gear for leaks
¾ Raise the forklift truck with the jack at the
front on the left and/or right.
¾ Place pieces of timber underneath.
e3861301
¾ Check the wheel gear for leaks on t
he right
and left depending on the versi
on at the
filling / checking screw and dr
ainplugas
well as at the housing flange.
¾ Please contact your authorised dealer in
the event of any leakage.
e3861340
Double hoses:
Check pretension
NOTE
For vehicles with the standard lift mast and
additional hydraulics attached the pretension
of the double hoses must be checked.
Pretensioning of the double hoses should be
5-10 mm per metre, based on the initial length.
¾ Adjust the pretension by sliding the hoses
in the retaining clips to the measurement
specified .
Operating Instructions – 386 807 1001 EN – 03/2006 131