To Next PageTo Next Page
Need help?Do you have a question about the Linear DEFIANT SSD and is the answer not in the manual?
General| Brand | Linear |
|---|---|
| Model | DEFIANT SSD |
| Category | Security System |
| Language | English |
Receives signals from system sensors and can be rotated for optimal placement.
Displays sensor status, open/closed, alarm events, and low battery warnings.
Flips open to access special system features and can be locked for security.
Adjusts the volume of advisory tones from the Console's speaker.
Used to add sensors, change codes, and access advanced programming.
For connecting optional external siren speakers and Home Automation controllers.
Holds the fuse for the backup battery; check if the POWER light flashes.
Space for an optional backup battery, automatically charged and monitored by the Console.
Monitors doors and windows, sending signals to the Console upon opening or closing.
Allows remote control of the Console and can trigger emergency alarms.
Guidance on where to centrally locate the Console for optimal sensor reach.
Instructions for positioning the Console's antenna for better signal reception.
Explains how to set the sensor switch for instant or delayed response.
Instructions for applying double-stick tape for sensor and magnet mounting.
Guide to labeling sensors for easy identification within the system.
Procedure for exiting the premises while the system is in Home Mode.
How the system automatically bypasses open sensors when armed.
The timed delay allowing users to leave after arming in Away Mode.
The timed delay allowing users to disarm upon entering before an alarm sounds.
How the system bypasses open sensors when armed in Away Mode.
How to activate Test Mode to verify sensor functionality.
How to identify and replace low batteries in system sensors.
Description of the Console's terminals for Home Automation connection.
Mentions programmable options for Home Automation Output, referring to another section.
Step-by-step process for learning new sensors into the Console.
Procedure for deleting learned sensors from the Console's memory.
How to configure a sensor to function as a chime at all times.
How to program a sensor to be recognized as an interior sensor.
How to enter Learn Mode for programming system features and options.
Describes the optional backup battery for power failure protection.
Details on additional door/window sensors and their features.
Features of the one-button remote control for arming/disarming.
Features of the two-button remote control for arming, disarming, and Home Automation.
Information about optional external sirens for louder alarms.
