16. EXPANDING YOUR SYSTEM
★ Adding additional sensors will increase the
protection provided by your system.
★ All ground-level perimeter openings and
accessible upper-story openings need
protection.
★ Motion detectors can protect interior areas
and areas were valuables are kept.
★ Wireless sensors make protecting a
detached garage easy (no wires to run).
★ Each sensor has a unique ID code that is
recognized by the Console.
ADDING SENSORS TO THE SYSTEM
☞Always start with the Console in Off Mode
(enter your secret code and press [OFF]).
☞Enter your secret code and press the
[LEARN] button.
◗ A “gong” and five “beeps” will sound.
◗ The sensor status indicators will light for
each sensor programmed into the Console.
☞Enter an unused sensor number from 01-16
(you must enter two digits, example: 5 = 05)
◗ The sensor indicator light will flash for the
sensor number selected.
☞Activate the sensor. (To add wireless
keypads, press the keypad’s [AUTO] key.)
◗ A single “bing” tone will sound when the
sensor is learned by the Console.
◗ A double “buzz” tone will sound if there is
already another sensor programmed to that
sensor number.
☞Exit Learn Mode by holding the [OFF] button
for three seconds.
☞NOTE: A sensor can be learned into more
than one location. Be sure to choose an
unused sensor number. If a sensor gets
entered into more than one location, delete
the duplicates. (See “Removing Sensors
from the System”.)
25 OF 40
START IN OFF
YOUR
SECRET
CODE
1 GONG &
5 BEEPS
NEW
SENSOR
NUMBER
ACTIVATE
SENSOR
DONE
Defiant SSD DF-16 Owner’s Manual
Linear P/N: 208968 C
Material: 20# White Mead Bond with 60# White Coated Cover
Ink: PMS 548 (Blue/Gray)
Size: 8 1/2" x 5 1/2"
23
To Next Page
Loading...
