RESTRICTED SECRET CODE
★ The Console can be programmed with two
secret codes, one that can access Learn
Mode and one that cannot.
★ The restricted secret code cannot access
Learn Mode, the master secret code can.
★ The restricted secret code is a good one to
give to children or any user that you want to
restrict from programming the Console.
✍ NOTE: For maximum security, a 3-5 digit
code is recommended.
★ The Console must be in Learn Mode to
make or change the restricted secret code.
☞Exit Learn Mode when all programming
changes are complete.
MASTER SECRET CODE
★ The master secret code is the code that was
entered when power was first applied to the
Console.
★ The master secret code can be changed
through programming to any 1-5 digit code.
✍ NOTE: For maximum security, a 3-5 digit
code is recommended.
★ The Console must be in Learn Mode to
make or change the master secret code.
☞Exit Learn Mode when all programming
changes are complete.
CONSOLE MASTER RESET
★ Master resetting the Console will set all of the
programming options back to the factory
values.
✍ NOTE: Master resetting the Console will
erase the master and restricted secret codes
and remove all programmed sensors.
☞Disconnect the backup battery (if installed).
☞Un-plug the Console’s wall transformer.
☞Press and hold down the [LEARN] button
while plugging in the wall transformer.
☞Release the [LEARN] button.
☞Create your secret code as described on
Page 10.
☞Re-connect the backup battery (if installed).
☞Re-program each sensor into the system.
34 OF 40
PROGRAMMING STEP #99
PROGRAM
STORE PROGRAM
1-5 DIGIT MASTER CODE
(3-5 DIGITS RECOMMENDED)
PROGRAMMING STEP #98
PROGRAM
STORE PROGRAM
1-5 DIGIT RESTRICTED CODE
(3-5 DIGITS RECOMMENDED)
PROGRAMMING STEP #98
REMOVES RESTRICTED
SECRET CODE
Defiant SSD DF-16 Owner’s Manual
Linear P/N: 208968 C
Material: 20# White Mead Bond with 60# White Coated Cover
Ink: PMS 548 (Blue/Gray)
Size: 8 1/2" x 5 1/2"
32
To Next Page
Loading...
Need help?
General
