EXIT DELAY BEEPS
★ The factory setting causes the Console to
beep during Exit Delays.
★ Alternately, the Exit Delay beeps can be
silenced.
★ The Console will be silent after arming to the
Away Mode until the Exit Delay expires, then
a single “gong” tone will sound.
★ The Console must be in Learn Mode to
make this change.
☞Exit Learn Mode when all programming
changes are complete.
TEST SENSORS LIGHT
★ The factory setting causes the Console’s
TEST SENSORS indicator to light every two
weeks.
★ Alternately, the TEST SENSORS light can be
disabled.
★ The Console must be in Learn Mode to
make this change.
☞Exit Learn Mode when all programming
changes are complete.
HOME AUTOMATION OUTPUT POLARITY
★ The factory setting causes the Console’s
Home Automation Output to provide a
current limited voltage source when
activated.
★ Alternately, the Console can be programmed
so the Home Automation Output provides a
current limited voltage source when
deactivated.
★ The Console must be in Learn Mode to
make this change.
☞Exit Learn Mode when all programming
changes are complete.
31 OF 40
PROGRAMMING STEP #65
PROGRAM
STORE PROGRAM
0 FOR EXIT BEEPS OFF
1 FOR EXIT BEEPS ON
PROGRAMMING STEP #68
PROGRAM
STORE PROGRAM
0 FOR VOLTAGE WHEN OFF
1 FOR VOLTAGE WHEN ON
PROGRAMMING STEP #67
PROGRAM
STORE PROGRAM
0 FOR TEST SENSORS OFF
1 FOR TEST SENSORS ON
Defiant SSD DF-16 Owner’s Manual
Linear P/N: 208968 C
Material: 20# White Mead Bond with 60# White Coated Cover
Ink: PMS 548 (Blue/Gray)
Size: 8 1/2" x 5 1/2"
29
To Next Page
Loading...
