HOME AUTOMATION OUTPUT TIME
★ The factory setting causes the Home
Automation Output to toggle between on
and off with each activation.
★ The Home Automation Output can be
programmed to turn on, then automatically
turn off after one to 2500 seconds (42
minutes).
★ The Console must be in Learn Mode to
make this change.
☞Exit Learn Mode when all programming
changes are complete.
REMOTE CONTROL ARMING LEVEL
★ The factory setting causes the portable
remote controls to arm to the Away Mode.
★ Alternately, the portable remote controls can
arm to the Home Mode.
★ Changing this setting will affect all the
portable remote controls used with the
system.
★ The Console must be in Learn Mode to
make this change.
☞Exit Learn Mode when all programming
changes are complete.
REMOTE CONTROL DISARMING LEVEL
★ The factory setting causes the portable
remote controls and wireless keypads to
disarm to the Off Mode.
★ Alternately, the remote controls and wireless
keypads can disarm to the Chime Mode.
★ Changing this setting will affect all the
portable remote controls and wireless
keypads used with the system.
★ The Console must be in Learn Mode to
make this change.
☞Exit Learn Mode when all programming
changes are complete.
29 OF 40
TIME IN SECONDS (1-2500)
0 = TOGGLE ON & OFF
PROGRAMMING STEP #40
PROGRAM
STORE PROGRAM
PROGRAMMING STEP #50
PROGRAM
STORE PROGRAM
2 FOR HOME MODE
3 FOR AWAY MODE
PROGRAMMING STEP #51
PROGRAM
STORE PROGRAM
0 FOR OFF MODE
1 FOR CHIME MODE
Defiant SSD DF-16 Owner’s Manual
Linear P/N: 208968 C
Material: 20# White Mead Bond with 60# White Coated Cover
Ink: PMS 548 (Blue/Gray)
Size: 8 1/2" x 5 1/2"
27
To Next Page
Loading...
