Linhai M565Li - Page 84

M565Li OWNER’S/OPERATOR’S MANUAL
16. MAINTENCE
84
Oil Change
1.
Remove the drain plug. Catch and discard used oil properly.
2.
Clean and reinstall the drain plug with a new sealing washer and tighten
securely (20 Nm).
3.
Remove the fill plug and add 250ml of SAE GL-5 85W/90 Gear Oil and
inspect oil level. Oil level should be kept even with the center of the drill point
(approximately below the top of the fill hole).
4.
Reinstall the fill plug. Tighten securely to 35 Nm.
5.
Check for leaks.