M565Li OWNER’S/OPERATOR’S MANUAL
16. MAINTENCE
87
Tires
Operating your ATV with worn tires, improperly inflated tires, non-standard
tires or improperly installed tire will affect handling, which could cause
an accident resulting in serious injury or death.
Follow the Safety Information below:
Important Safety Information
Maintain proper tire pressure according to information below. Improper tire
pressure may affect ATV maneuverability.
Do not use improper tires. Use of non-standard size or type of tires may
affect ATV handling.
Make sure the wheels are installed properly. If wheels are improperly
installed, it could affect handling and tire wear.
Wheel Removal
1.
Stop the engine, place the transmission in gear and lock the parking brake.
2.
Loosen the wheel nuts slightly.
3.
Elevate side of the ATV by placing a suitable stand under the footrest frame.
4.
Remove the wheel nuts and remove the wheel.
Tire Pressure
front rear
48kPa 48kPa
Wheel Installation
1.
With the transmission in gear and parking brake locked, place wheel in
correct position on the wheel hub. Be sure valve stem is toward the outside and
rotation arrows on the tire point toward forward rotation.
2.
Attach the wheel nuts and finger tighten them.
3.
Lower the ATV to the ground.
4.
Securely tighten wheel nuts
according to the chart found in:
“16.MAINTENANCE/Wheel Nut Torque”.
To Next Page
Loading...
