Images are for illustration only and may differ from components supplied
Link Research Ltd www.linkres.co.uk Support UK/Europe + (44) 1923 474099 USA +(1)9786715700
Page 26 of 31 CL140045 Issue C Link L1500 Series System Manual
BNC 75Ω bayonet socket Video Not Used
BNC 75Ω bayonet socket Output mote UHF Transmitter
Used for Re
operation
BNC 75Ω bayonet socket ASI Input Not Used
3-way XLR Tally 1 & Tally 2 Sony Red/Green Tally input
6pin LEMO Rx In Interface to L2132 Receiver
IEC socket* Mains 110 –220VAC Mains power input
7.3 Unit Description
.3.1 Input / Output Connections
)
Note;_+ Tally support for the Thomson Camera system requires a Tally Interface Box.
7
Tally 1 (Red)/ Tally 2 (Green
Two independent Tally inputs
This is for Sony Tally support.
Connector - 3pin XLR Socket
Pin Function
Pin 1
Pin 2 Closure Dry Contact
Pin 3 Clos e Dry Contact ur
RS422 comms for remote UHF transmitter operation.
ot implemented yet 07/07)
ating Cable Plug :- LEMO FGG0B305CLAD52Z
Remote Data
The five pin connector provides the
(n
Chassis Socket Connector :- LEMO EEF0B305CLV
M
LE n MO Pi Function
Pin 1 Left Line+
Pin 2 Left e - Lin
Pin 3 0v
Pin 4 Right Line +
Pin 5 Right Lin - e
ta from the camera is sent as user data in the ASI stream back to the OCP via the Data
he device is remotely driven by the L2132/4 receiver through the remote port.
Connector - LEMO 6pin socket EEF.0B CLL
Receiver Interface – RS232 / RS485
The return da
transmitter.
T
.306.
‘Lem pe o’ Ty F unction – RS232 Function RS232 –
Pin 1 Tx Data (output)
Pin 2 Rx Da nput) Camer t data ta (i a Re
Pin 3 0v 0v
Pin 4 Tx Remote (output) RS232
Pin 5 Rx Rem put) ote (In
Pin 6 0v 0v
A 9 way ‘D’ Type socket provides the RS422 interfaces to the OCP.
OCP Interface – RS232
‘D ’ Type Function
Pin 1
Pin 2 Tx
Pin 3 Rx
To Next Page
Loading...
Need help?
General