EtherFast
®
10/100 LAN CardInstant EtherFast
®
Series
10.Choose the Access Control tab. Verify that Shared-level access control is
selected.
11. Click the OK button. Your system may ask you for your Windows 98 CD-
ROM or the location of the Windows 98 installation files. If it does, direct
Windows to the appropriate location, (i.e., D:\win98, where D is the letter
of your CD-ROM drive, making sure you have the Windows 98 CD-ROM,
or C:\windows\options\cabs).
12. Once Windows has copied the necessary files, the System Settings Change
window appears. Remove all disks from your PC and click the Ye s button
to restart your PC. If you don't see this window, simply shut down Windows
98 and restart your PC. Remember to remove any disks prior to rebooting.
2625
5. After ensuring that all of the listed network components are installed on
your system, in the
Primary Network Logon
box select Client for
Microsoft Networks .
6. Click on the Identification tab. Type the name of your computer in the
Computer Name box. Choose a name that is unique from the other com-
puter names on the network.
8. Type the name of your workgroup in the Workgroup box. The Workgroup
name should be the same Workgroup Name in use by all of the other PCs
on the network. Use the same Workgroup Name that is in use on your other
computers for ease of use.
9. (Optional) Enter a description of your computer in the Computer
Description box. This box may be left blank.
1RWH <RXU &RPSXWHU 1DPH DQG
:RUNJURXS 1DPH PXVW ERWK EH IHZHU
WKDQ FKDUDFWHUV DQG VKRXOG RQO\
FRQVLVWRIQXPEHUVDQGOHWWHUV
To Next Page
Loading...
Need help?
General
