Linksys ETHERFAST 10/100 User Manual

3. Highlight Protocol and click the Add button.
4. Select Microsoft from the list of “Manufacturers” and TCP/IP from the list
of “Network Protocols” and click the OK button.
5. Repeat steps two through four to install other protocols such as NetBEUI or
IPX/SPX.
At this point, you must restart your computer. Installation is complete.
EtherFast
®
10/100 LAN Card
7271
Instant EtherFast
®
Series
Appendix F: Installing the Network
Protocols for Windows 95, 98, and
Millennium
1. From the Start
Menu, select
Settings and bring
up the Control
Panel. From the
Control Panel,
double-click on
the Network icon.
2. Select Linksys
LNE100TX(v5) Fast
Ethernet Adapter from the
list. Click the Add button.
From this screen, you can
also press the Properties
button. You can then verify
that the drivers are working
under Enhanced Mode on the
Driver Type tab, or recon-
figure the card on the
Advanced tab.
1RWH%HIRUHDGGLQJDQ\QHWZRUN
SURWRFROVYHULI\ WKDWWKH SURWRFRO
LV QRW DOUHDG\ LQVWDOOHG 1HYHU
LQVWDOOGXSOLFDWHSURWRFROV

Linksys ETHERFAST 10/100 Specifications

General

Brand	Linksys
Model	ETHERFAST 10/100
Category	Network Card
Language	English