69
Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Router
How to Establish a Secure IPSec Tunnel
4-Port Gigabit Security Router with VPN
13. Change the authentication method to Use this string to protect the key exchange (preshared key), and
enter the preshared key string, such as XYZ12345. (This is a sample key string. Yours should be a key that is
unique but easy to remember.) Then click the OK button.
14. This new Preshared key will be displayed. Click the Apply button to continue, if it appears on your screen;
otherwise, proceed to the next step.
15. Click the Tunnel Setting tab. Click the radio button for The tunnel endpoint is specified by this IP
Address, and enter the Windows 2000/XP computer’s IP Address.
Figure C-22: Preshared Key
Figure C-23: New Preshared Key
Figure C-24: Tunnel Setting Tab
To Next Page
Loading...
Need help?
General
