112
Appendix H: Specifications
IP Telephony System
Stats in BYE Message
Syslog & Debug Server Records - Per Line Configurable
Physical Interfaces 2 10/100BaseT RJ-45 Ethernet Port (IEEE 802.3) — 1 WAN, 1 LAN
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)
Subscriber Line
Interface Circuit (SLIC) Ring Voltage: 40-55 Vrms Configurable
Ring Frequency: 10 Hz - 40 Hz
Ring Waveform: Trapezoidal and Sinusoidal
Maximum Ringer Load: 3 REN
On-hook/off-hook Characteristics:
On-hook Voltage (tip/ring): -50 V NOMINAL
Off-hook Current: 25 mA min.
Terminating Impedance: 8 Configurable Settings including North America 600 ohms, European CTR21
Regulatory
Compliance FCC (Part 15 Class B), CE Mark, A-Tick/C-Tick
Power Supply Switching Type (100-240v) Automatic
DC Input Voltage: +5 VDC at 2.0 A max.
Power Consumption: 5 Watts
Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m Cord
Indicator Lights/LEDs Power, Ethernet, Phone 1/2 LEDs
Documentation Quick Installation
User Guide
Administration Guide - Service Providers Only
Provisioning Guide - Service Providers Only
To Next Page
Loading...
