Linn Akurate Kontrol Specification And Commands

Akurate Kontrol pre-amplifier - RS232 ASCII Interface Specification and Commands - Version 1.2
12
1.9: IR
 $IR ?$
 !$IR ON$
 !$IR OFF$
 Return current IR control status
 $IR [Y|ON]$
 !$IR ON$
 Enable IR control of product
 $IR [N|OFF]$
!$IR OFF$
 Disable IR control of product
1.10: INIT
 $INIT$
 !$INIT$
 Resets all product parameters back to factory defaults
1.11: VERSION
 $VERSION SOFTWARE ?$
 !$VERSION SOFTWARE H8 v PPC v DSP0 v DSP1 v DIGFPGA v VIDFPGA v$
 Return current versions of system software.
Notes:
The software versions returned are as follows …
Field … Software for … Current version …
H8 H8 Processor ?
DSP0 Digital Signal Processor 0 S1210101
DIGFPGA Digital FPGA S0870101
The format of „v‟ is „tpppvvvv’
where: „t‟ is the software release type („P‟ = prototype and „S‟ = release)
„ppp‟ is the software identifier (3 digits)
„vvvv‟ is the software version (4 digits)
The software versions should be read from the appropriate storage area each time this command is
received, and should not be stored as hard coded strings as they will then be incorrect when
software is updated.

Linn Akurate Kontrol Specifications

General

Brand	Linn
Model	Akurate Kontrol
Category	Amplifier
Language	English