Linn Akurate Kontrol Specification And Commands

Akurate Kontrol pre-amplifier - RS232 ASCII Interface Specification and Commands - Version 1.2
iii
Table of Contents
INTRODUCTION 1
1: MESSAGE PROTOCOL 2
1.1: Overview 2
1.2: Message Syntax 2
1.3: Identifier Considerations 3
1.4: Syntax of Commands and Responses 4
1.4.1: Command Syntax 4
1.4.1.1: Command Help 4
1.4.1.2: Command 4
1.4.2: Solicited Response Overview 5
1.4.2.1: Initial Response 5
1.4.2.1.1: Initial Response Failure 5
1.4.2.2: Final Response 5
1.4.2.2.1: Final Response Failure 5
1.4.3: Unsolicited Response Overview 6
1.4.3.1: Unsolicited Response 6
1.4.3.2: Unsolicited Response Events 6
1.5: Identity Commands 7
1.5.1: ID 7
1.5.2: GID 7
1.6: Communication Commands 8
1.6.1: BAUD 8
1.6.2: RESET 8
1.6.3: ECHO 8
1.6.3.1: Power_Up Message 8
1.7: Polling Command 9
1.7.1: POLL 9
1.7.2: Polling Explained 10
1.8: Status Command 11
1.8.1: STATUS 11
1.8.1.1: Status Codes 11
1.9: IR 12
1.10: INIT 12
1.11: VERSION 12
1.12: COUNTER 13
2: SYSTEM COMMANDS 14
2.1: Command Help 14
2.2: System Commands 14

Linn Akurate Kontrol Specifications

General

Brand	Linn
Model	Akurate Kontrol
Category	Amplifier
Language	English