MIDNIGHT MOVIE
For use with a Linn UNIDISK player or other DVD
player.
This feature allows you to add compression to the Dolby Digital signal
on DVD-Videos. Adding compression reduces sudden increases in
volume, such as the sound of an explosion. When watching a DVD-
Video it is operated by pressing and holding
SURR
on the handset
until MIDNIGHT MOVIE ON/OFF is shown on the front panel display,
then pressing
SURR
to toggle between on and off (see Midnight
Movie mode, page 23).
Range:
LOW
(least effective),
MEDIUM, HIGH
(most effective)
Default setting:
LOW
DOLBY PRO LOGIC II MUSIC
Dolby Pro Logic II is an audio signal processing algorithm that
converts a stereo audio signal to a five-channel audio signal.
Dolby Pro Logic II Music is a mode of Dolby Pro Logic II that is
particularly suited to music. It features three user-adjustable
parameters that are accessed from this item.
CENTRE WIDTHH
This parameter allows adjustment of the audio signal between the
centre and front loudspeakers.
If set to
0
, all of the signal for the centre channel is sent to the
centre loudspeaker.
If set to
3
, a portion of the centre channel signal is also sent to the
front loudspeakers.
If set to
7
, all of the centre channel signal is split evenly between
the front left and right loudspeakers.
Range:
0 to 7
Default setting:
3
10 AKURATE KONTROL
Select
EXIT
to leave setup (if changes have been made and SAVE
has not been selected, you will be prompted to save or not save
the changes).
Select
BACK
to return to the MAIN MENU.
Select
EXIT
to leave setup.
Audio setup
VOLUME RATE
Set the speed at which the AKURATE KONTROL changes volume
when the volume keys are pressed.
Range:
1/10
(slowest)
to 10/10
(fastest)
Default setting:
8/10
MUTE RATE
Set the speed at which the AKURATE KONTROL mutes or unmutes
the volume when is pressed, or when the source is changed.
Range:
1/10
(slowest)
to 10/10
(fastest)
Default setting:
8/10
VOLUME LIMIT
Set the maximum volume level of the AKURATE KONTROL.
Range:
0 to 100
(in 0.5 steps)
Default setting:
1000
VOLUME PR
ESET
Set the volume level of the AKURATE KONTROL when it is brought out
of standby. The setting cannot be higher than the Volume Limit setting
(see above).
Range:
0 to 100
(in 0.5 steps)
Default setting:
40
ENGLISH
To Next Page
Loading...
Need help?
General
