ENGLISH
11AKURATE KONTROL
PANORAMA CONTROL
If set to
ON
the Panorama Control extends the audio signal from
the front loudspeakers to include the surround loudspeakers. This
adds a "wraparound" effect to the sound.
Options:
ON, OFF
Default setting:
OFF
DIMENSION CONTROL
This parameter allows you to shift the balance between the front
and rear loudspeakers. Positive values move the sound towards
the front, negative values towards the rear. If a recording is too
spacious or strong from the surround loudspeakers it can be
shifted "forward" to get a better balance. Likewise, a recording that
is too strong from the front loudspeakers can be shifted
"backward" to make the sound more enveloping.
Range:
-3
(most rear)
to 3
(most front)
Default setting:
0
(neutral)
Select
SAVE
to save your changes and return to the AUDIO
OPTIONS menu.
Select
BACK
to return to the AUDIO OPTIONS menu without
saving changes.
Select
EXIT
to leave setup (if changes have been made and SAVE
has not been selected, you will be prompted to save or not save
the changes).
Select
SAVVE
to save your changes and return to the MAIN MENU.
Select
BACK
to return to the MAIN MENU without saving changes.
Select
EX
IT
to leave setup (if changes have been made and SAVE has
not been selected, you will be prompted to save or not save the
changes).
General setup
DISPLAY INTENSITY
Set the brightness of the front panel display.
Options:
LOW, MEDIUM, HIGH
Default setting:
MEDIUM
DISPLAY CONTENT
Set what information you want displayed on the AKURATE
KONTROL’s front panel when it is in normal operation.
Options:
LAST USED*, SOURCE AND VOLUME, VOLLUME,
SOURCE
Default setting:
SOURCE AND VOLUME
* If you change source, the new source will remain displayed on the
front panel. If you change volume, the volume level will remain
displayed.
DISPLAY TIMEOUT
Set the time that new volume or source information is displayed on
the front panel before the AKURATE KONTROL shows its Display
Content (see above).
Options:
1 SEC. to 10 SEC.
Default setting:
2 SEC.
SLEEP TIMEOUT
Set the elapsed time before the front panel display enters sleep mode
(i.e. shows three dots) after a key on the front panel or handset is
pressed.
Options:
NEEVER SLEEP,
IMMEDIATE, 30 SEC., 5 MINS.
Default setting:
NEVER SLEEP
ENGLISH
To Next Page
Loading...
Need help?
General
