Operation
Standby key
To toggle between standby mode and operating mode:
• Press on the front panel or handset.
Amp mode
To use the following functions the handset must be in Amp mode –
• Direct source selection (e.g. selecting a CD source by pressing
the
key)
• Adjusting the balance or speaker trim
• Adjusting the Lip Sync Delay
To put the handset in Amp mode, press the
Selecting a source
To select the source you want to listen to:
use this method
• Hold or repeatedly press the
SOURCE –/+
key on the front
panel or
SRC –/+
key on the handset. This will cycle through all
available sources.
• When the desired source is shown on the front panel display,
release the key then press
SELECT
on the front panel, or wait
and the AKURATE KONTROL will select the source
automatically.
or this method (handset must be in Amp mode)
• Press the appropriate direct source key (e.g.
DVD
or
CD
) found
on the bottom two rows of keys of the handset. For a Linn
AKURATE CD, press
CD
. For the Linn Disc source, press
DVD
.
• Use the
/
key to cycle through available sources of that
type.
• When the desired source is shown on the front panel display,
press , or wait and the AKURATE KONTROL will select
the source automatically.
Adjusting the audio
ENGLISH
To Next Page
Loading...
Need help?
General
