Record function
The record function allows you to route an audio signal through the
AKURATE KONTROL to a recording device such as a DAT recorder.
The table below details the routing capabilities of the AKURATE
KONTROL.
To set a record path:
• Press
(‘8’ key) on the handset.
• Use the
/
keys to select the source you want to record,
then press .
• Use the
/
keys to select the record mode you want to use
for making the recording, then press .
Midnight Movie mode
For use with a Linn UNIDISK player or other DVD player.
This feature allows you to add compression to the Dolby Digital audio
signal on DVD-Videos. Adding compression reduces sudden increases
in volume, such as the sound of an explosion.
To switch Midnight Movie mode on/off:
• Press and hold
on the handset until MIDNIGHT MOVIE
MODE ON/OFF is shown on the display.
• Press
to toggle between on and off.
When Midnight Movie mode is on, MIDNIGHT is shown on the front
panel display.
Note:
The amount of compression can be adjusted using the Midnight
Movie item in the Audio setup menu (see MIDNIGHT MOVIE, page
10).
Restoring the original audio settings
To reset all the above audio items to their neutral/default settings:
• Press and hold
on the handset until AUDIO
SETTINGS RESET is shown on the front panel display.
STORE
SHIFT
AMP
RECORD
DVD
SURR
DO CLOCKWHERE WHAT
OFF
CD
DVD CD
AMP
AUDIO
ADJUST
VIDEO
ADJUST
PRESET
SRC +
+ --
SRC -
BAND
SCAN TUNE
12 3
45 6
78 9
SIGNALRECORDLISTEN
EXCLUDEINCLUDESHUFFLE
A-BTRACKDISC
0
SHIFT
Analogue source
No analogue source can
be routed to the digital
outputs
Any analogue source can
be routed to the analogue
outputs
Digital source
Only the digital source
currently being listened to
can be routed to the
digital outputs
Only the digital source
currently being listened to
can be routed to the
analogue outputs
Analogue record
outputs
Digital record
outputs
23AKURATE KONTROL
ENGLISH
To Next Page
Loading...
Need help?
General
