EasyManuals Logo

Linn Akurate Kontrol User Manual

Linn Akurate Kontrol
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Using the AKURATE KONTROL with a Linn UNIDISK
player
There are advantages in operation when using the AKURATE
KONTROL with a Linn UNIDISK player:
When a disc is loaded into the UNIDISK player and the Linn Disc
source is selected as the source on the AKURATE KONTROL,
the AKURATE KONTROL will automatically switch to the required
input for the loaded disc.
The AKURATE KONTROL will choose an appropriate surround
sound format for a disc’s audio stream.
If you wish to use your AKURATE KONTROL with a Linn UNIDISK
player, follow the instructions beelow.
1. Switch off all equipment.
2. Connect
the UNIDISK player’s FRONT A or B, SURR, CENTRE and
SUB line output connectors to the 5.1 GROUP input on the
AKURATE KONTROL (requires 6 RCA phono-to-phono leads)
the TOSLINK or SPDIF output from the UNIDISK player to
one of the TOSLINK or SPDIF inputs on the AKURATE
KONTROL (requires a Toslink lead or digital audio lead).
3. Connect the video outputs you wish to use from the UNIDISK
player to your display device.
4. Connect the RS232 product-to-product lead (supplied with the
AKURATE KONTROL) from the AKURATE KONTROLs RS232
OUT to the UNIDISK player’s RS232 IN.
5. Connect the AKURATE KONTROLs REMOTE OUT to the
UNIDISK player’s REMOTE IN (requires an RCA phono-to-
phono lead).
6. Switch on all equipment.
6. Enter User Options on your AKURATE CD.
Set –
Front Panel IR Commands to
IGNORED
Channel Setup to
5.1 CHANNEL
RS232 Events to
ENABLED
RS232 Baud Rate to
9600
7. Exit User Options.
8. Enter the Speaker setup menu on the AKURATE KONTROL.
Configure the menu as appropriate for the loudspeakers in
your system.
9. Enter Source setup. Set ANALOG 1, 2 and 3 to
NONE
.
Select ANALOG GROUP and alter the SURROUND
CHANNELS setting if required (see SURROUND CHANNELS,
page 9).
Save settings.
10. Enter General setup.
11. Enter the RS232 Setup sub-menu.
Set –
Baud Rate to
9600
Parity to
EVEN
Data Bits to
7
Stop Bits to
1
RS232 Events to
(either ssetting)
Save settings.
12. Enter the Linn Disc setup menu and set ANALOG SOURCE
to
ANALOG GROUP
.
Save settings and exit setup.
15AKURATE KONTROL
ENGLISH

Other manuals for Linn Akurate Kontrol

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linn Akurate Kontrol and is the answer not in the manual?

Linn Akurate Kontrol Specifications

General IconGeneral
BrandLinn
ModelAkurate Kontrol
CategoryAmplifier
LanguageEnglish

Related product manuals