Rev: 08.30.22 Page 36 CCD-0006500
B. Tap the slider button (Fig. 38A) to turn Auto-Reconnect on so the smart device will always
automatically reconnect with the controller.
C. Tap the slider button again to turn Auto-Reconnect off.
D. Tap the Unpair button (Fig. 38B) for the paired/connected shade.
E. The Paired Shades screen (Fig. 39A) will reflect the removed shade.
F. Tap the Back arrow (Fig. 39B) to return to the Connect screen (Fig. 34).
Fig. 38
Fig. 39
A
B
B
A
High Speed Mesh Topif so equipped
Operation of the high speed mesh top is the same as for a standard canvas top. The high speed mesh top
is rated for speeds up to 50 mph WITHOUT the use front straps. However, if exceeding 50 mph front straps
MUST be used. Depending on the type of control installed, refer to one of the following sections:
• Helm-mounted Switch
• Key-Fob (Remote Control)
• Touch Controller or App