Rev: 06.14.24 Page 11 CCD-0007721
Controller Connections
The controller has connections on two sides (Fig. 8). The connections on one side are for power into the
controller and extend and retract outputs to each motor.
The connections on the other side are for an external switch, a parking brake input and CAN
communications to OneControl systems.
Left Motor Extend
Left Motor Retract
Power
Ground
Right Motor Retract
Right Motor Extend
Parking
Brake
(Motorized)
Switch In
Switch Out
Switch
Power
Not
Used
CAN
Fig. 8
To Next Page
Loading...
