Rev: 09.19.23 Page 21 CCD-0007153
Fig. 46
4. Follow the directions on the next screen (Fig. 47) to calibrate the LED touchpad controller. Place a level
on the floor of the coach to ensure a level reference point in the coach. Press “LEVEL VEHICLE”
(Fig. 47A) on the touchpad.
Fig. 47
A
NOTE: Do NOT move inside coach while the system is trying to level. A leveling error code screen
(Fig. 46) will appear if movement is detected. Press Home (Fig. 46A) or Menu (Fig. 46B) icons to get
out of this page.
A B
To Next Page
Loading...