Why doesn't the register record correctly when product flows through Liquid Controls Measuring Instruments?
If product flows through the Liquid Controls Measuring Instruments meter, but the register does not record correctly, it may be caused by an adjuster not properly calibrated, an incorrect gear plate or gear ratio being installed, or air being in the system.
General| Temperature Range | -40°F to +160°F (-40°C to +71°C) standard, extended ranges available |
|---|---|
| Materials | stainless steel |
| Type | Positive displacement flow meter |
| Fluid Compatibility | fuels, oils, and chemicals |
| Sizes | 6" |
| Output Options | Pulse |
General safety guidelines and preparation steps before meter usage.
Procedures for safely relieving pressure and draining liquid from the piping system.
Actions for gas fires: evacuation, reporting, and fire suppression.
Procedures for gas leaks: evacuation, ventilation, and ignition prevention.
Procedure for correctly timing rotor gears using timing marks.
Addresses leakage from packing gland and internal metering chamber.
Explains causes and solutions for cover gasket leakage.
Diagnoses issues of meter running but register not functioning.
To Next Page
