LiteOn EVO 8000 Series - Page 66

63
Parameter
Name
Description
Setting Range
3546: Resets 3-Wire Sequence / 50Hz / 460V
3548: Resets 3-Wire Sequence / 50Hz / 480V
3638: Resets 3-Wire Sequence / 60Hz / 380V
3641: Resets 3-Wire Sequence / 60Hz / 415V
3644: Resets 3-Wire Sequence / 60Hz / 440V
3646: Resets 3-Wire Sequence / 60Hz / 460V
3646: Resets 3-Wire Sequence / 60Hz / 480V
3648: Resets 3-Wire Sequence / 60Hz / 480V
A1-04
Password
Set password to parameter A1-05 and enter the
password to parameter A1-04 to unlock it.
Parameters A1-01 to A1-03, A1-06, A2-01 to
A2-32 cannot be edited until correct password is
entered to A1-04
Default∶ 0000
Min.: 0000
Max.: 9999
A1-05
Password Setting
A1-06
HD Selection
0∶ Heavy Duty (HD)
Default: 0
A2: User-Defined Parameters
A2-00 to
A2-31
User-Defined
Parameters 1 to 32
Selects up to 32 parameters and assigns them to
parameter A2-00 to A2-31. Saved parameters can
be viewed in User-Defined Parameter Access. To
assign specific parameters to A2-00 to A2-31, set
parameter A1-01 to 2. The saved parameters
A2-00 to A2-31 can only be viewed if A1-01 is set
to 1
Parameter
Default
Description
A2-00
b1-00
Frequency command
selection
A2-01
b1-01
Operation command
selection
A2-02
C1-00
Acceleration time 1
A2-03
C1-01
Deceleration time 1
A2-04
C3-00
Torque Compensation Gain
A2-05
d1-02
Maximum output
frequency
A2-06
d1-03
Maximum output voltage
A2-07
d1-04
Basic motor frequency
A2-08
d1-05
Motor basic voltage
A2-09
o2-06
Motor running direction
A2-10
b1-10
Power ON/OFF selection
A2-11
E2-00
Relay1function selection
Range: A1-00 to F1-23