LiteOn EVO 8000 Series - Page 81

78
Parameter
Name
Description
Setting Range
Command 1
To use speed commands for each multi-step
speed, set E1-□□ to 5, 6, 7 and 8 (multi-step
speed command 1, 2, 3, 4). Sets E1-□□ to 9 for Jog
frequency command.
The upper limit is determined by d1-02 and L2-00.
In PM Closed-Loop Vector Control, o1-00 will be
automatically set to 1 with the unit set to %.
When L2-00 (Frequency Upper Limit) is adjusted,
the exceeded frequency in L1-00 to L1-15 will be
automatically set to the upper limit determined in
L2-00.
To use speed commands for each multi-step
speed, set E1-□□ to 5, 6, 7 and 8 (multi-step
speed command 1, 2, 3, 4). Sets E1-□□ to 9 for Jog
frequency command.
The upper limit is determined by d1-02 and L2-00.
In PM Closed-Loop Vector Control, o1-00 will be
automatically set to 1 with the unit set to %.
When L2-00 (Frequency Upper Limit) is adjusted,
the exceeded frequency in L1-00 to L1-15 will be
automatically set to the upper limit determined in
L2-00.
Min.: 5.00 Hz
Min.: 0.00
Max.: <5>
L1-01 <4>
Frequency
Command 2
Default: 8.00 Hz
Min.: 0.00 Hz
Max.: <5>
L1-02 <4>
Frequency
Command 3
Default: 10.00Hz
Min.: 0.00
Max.: <5>
L1-03 <4>
Frequency
Command 4
Default: 12.00Hz
Min.: 0.00Hz
Max.: <5>
L1-04 <4>
Frequency
Command 5
Default: 15.00Hz
Min.: 0.00Hz
Max.: <5>
L1-05 <4>
Frequency
Command 6
Default: 20.00Hz
Min.: 0.00Hz
Max.: <5>
L1-06 <4>
Frequency
Command 7
Default: 25.00Hz
Min.: 0.00Hz
Max.: <5>
L1-07 <4>
Frequency
Command 8
Default: 30.00Hz
Min.: 0.00Hz
Max.:<5>
L1-08 <4>
Frequency
Command 9
Default: 35.00Hz
Min.: 0.00Hz
Max.: <5>
L1-09 <4>
Frequency
Command 10
Default: 40.00Hz
Min.: 0.00Hz
Max.: <5>
L1-10 <4>
Frequency
Command 11
Default: 42.00Hz
Min.: 0.00Hz
Max.: <5>
L1-11 <4>
Frequency
Command 12
Default: 45.00Hz
Min.: 0.00Hz
Max.: <5>
L1-12 <4>
Frequency
Command 13
Default: 50.00Hz
Min.: 0.00Hz
Max.: <5>
L1-13 <4>
Frequency
Command 14
Default: 50.00Hz
Min.: 0.00Hz