LiteOn EVO600043S1D5E20F User Manual

142
o1-02 and o1-03, the unit can be set to any。
No.
Name
Setting Range
Default
o1-00
Frequency Command
Setting/Display
0 ～ 2
0
0 ：Use units of 0.01Hz
1 ：Use units of 0.01%（100% as maximum output frequency）
groupof motor poles）
 o1- 01 Setting Unit V / f characteristic frequency-dependent parameters
Select V / f curve frequency setting parameter (d1-02,04,06,08,10) setting unit. When o1-01 =
1, in order for the Poles d2-03 to min-1 units can be set
No.
Name
Setting Range
Default
o1-01
Setting Unit V / f
characteristic
frequency-dependent
parameters
0,1
0
0 ：Use units of Hz
1 ：Use units of min-1
 o1- 02 User-Defined Frequency Command Setting/Display
Setpoint at maximum output frequency to be displayed。
No.
Name
Setting Range
Default
o1-02
User-Defined Frequency
Command Setting/Display
1 ～ 9999
Setting as o1-00
 o1- 03 Frequency Command Setting/Display Decimal Places
Setting frequency command setting/display decimal places
No.
Name
Setting Range
Default
o1-03
Frequency Command
Setting/Display Decimal
Places
0 ～ 3
Setting as o1-00

LiteOn EVO600043S1D5E20F Specifications

General

Brand	LiteOn
Model	EVO600043S1D5E20F
Category	Controller
Language	English