LMI Technologies Gocator 2140 User Manual

Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 168
To manually remove model edge points:
1. In the Models list, select the model you want to configure by clicking on its selection control.
2. In the Model Editing tab, click on the Edit button.
3. On the toolbar above the data viewer, make sure the Select tool is active.
4. Click in the data viewer and hold the mouse button while moving the pointer over the edge points you want
to remove.

LMI Technologies Gocator 2140 Specifications

General

Brand	LMI Technologies
Model	Gocator 2140
Category	Accessories
Language	English