LMI Technologies Gocator 2140 User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 376
EdgeFiltering
Element Type Description
@used Bool Whether or not this section is used.
Enabled Bool Enables edge filtering.
PreserveInteriorEnabled Bool Enables preservation of interior.
ElementWidth 64f Element width (mm).
ElementWidth.min 64f Minimum element width (mm).
ElementWidth.max 64f Maximum element width (mm).
ElementLength 64f Element length (mm).
ElementLength.min 64f Minimum element length (mm).
ElementLength.max 64f Maximum element length (mm).
EdgeFiltering Child Elements
PartMatching
The PartMatching element contains settings related to part matching.
Element Type Description
Enabled Bool Enables part matching.
Enabled.used Bool Whether or not this field is used.
MatchAlgo 32s
Match algorithm.
0 – Edge points
1 – Bounding Box
2 – Ellipse
Edge Section
See Edge below.
BoundingBox Section
See BoundingBox below.
Ellipse Section
See Ellipse on the next page.
PartMatching Child Elements
Edge
Element Type Description
ModelName String Name of the part model to use. Does not include the .mdl extension.
Acceptance/Quality/Min 64f Minimum quality value for a match.
Edge Child Elements
BoundingBox
Element Type Description
ZAngle 64f Z rotation to apply to bounding box (degrees).
AsymmetryDetectionType 32s
Determine whether to use asymmetry detection and, if enabled,
which dimension is the basis of detection. The possible values are:
BoundingBox Child Elements

LMI Technologies Gocator 2140 Specifications

General

Brand	LMI Technologies
Model	Gocator 2140
Category	Accessories
Language	English