LMI Technologies Gocator 2140 User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 412
Element Type Description
id (attribute) 32s Measurement ID. Optional (measurement disabled if not
set).
Name String Measurement name.
Features
Collection Collection of geometric feature outputs available in the
tool. See SurfaceCsHole on page 409.
Enabled Boolean
Measurement enable state:
0 – Disable
1 – Enable
HoldEnabled Boolean
Output hold enable state:
0 – Disable
1 – Enable
SmoothingEnabled Boolean
Smoothing enable state:
0 – Disable
1 – Enable
PreserveInvalidsEnabled Boolean Preserve invalid measurements enable state
0 – Disable
1 – Enable
SmoothingWindow 32u Smoothing window.
Scale 64f Output scaling factor.
Offset 64f Output offset factor.
DecisionMin 64f Minimum decision threshold.
DecisionMax 64f Maximum decision threshold.
Countersunk Hole Tool Measurement
SurfaceDimension
A SurfaceDimensionelement defines settings for a surface dimension tool and one or more of its
measurements.
Element Type Description
Name String Tool name.
Features Collection Not used.
Source 32s Surface source.
Anchor\X String (CSV) The X measurements (IDs) used for anchoring.
Anchor\X.options String (CSV) The X measurements (IDs) available for anchoring.
Anchor\Y String (CSV) The Y measurements (IDs) used for anchoring.
Anchor\Y.options String (CSV) The Y measurements (IDs) available for anchoring.
Anchor\Z String (CSV) The Z measurements (IDs) used for anchoring.
SurfaceDimension Child Elements

LMI Technologies Gocator 2140 Specifications

General

Brand	LMI Technologies
Model	Gocator 2140
Category	Accessories
Language	English