LMI Technologies Master 100 User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 374
FixedLength
Element Type Description
StartTrigger 32s
Start trigger condition:
0 – Sequential
1 – Digital input
Length 64f
Profile length (mm).
Length.min 64f
Minimum profile length (mm).
Length.max 64f
Maximum profile length (mm).
FixedLength Child Elements
VariableLength
Element Type Description
MaxLength 64f Maximum surface length (mm).
MaxLength.min 64f
Minimum value for maximum profile length (mm).
MaxLength.max 64f
Maximum value for maximum profile length (mm).
VariableLength Child Elements
Rotational
Element Type Description
Circumference 64f Circumference (mm).
Circumference.min 64f Minimum circumference (mm).
Circumference.max 64f Maximum circumference (mm).
Rotational Child Elements
PartDetection
Element Type Description
Enabled Bool Enables part detection.
Enabled.used Bool Whether or not this field is used.
Enabled value Bool Actual value used if not configurable.
MinArea 64f Minimum area (mm
2
).
MinArea.min 64f Minimum value of minimum area.
MinArea.max 64f Maximum value of minimum area.
MinArea.used Bool Whether or not this field is used.
GapWidth 64f Gap width (mm).
GapWidth.min 64f Minimum gap width (mm).
GapWidth.max 64f Maximum gap width (mm).
GapWidth.used Bool Whether or not this field is used.
PartDetection Child Elements

LMI Technologies Master 100 Specifications

General

Brand	LMI Technologies
Model	Master 100
Category	Accessories
Language	English