SECTION 2.6 9
2.6 Low Battery
When there is no display, sound and screen is non-functional, replace batteries imme-
diately. Use supplied physical backup keys to unlock the door. Alternatively, use a 9V
battery as shown below to temporarily activate the lock.
Your Lockly will automatically detect battery polarity. So hold your 9V battery lead in
place against bottom of the Lockly to temporarily activate the screen to enter your
Access Code. Be sure to hold the 9V battery against the contact points located at the
bottom of the lock until you have successfully unlocked your door with your Access
Code. Once unlocked, the battery should be replaced or charged immediately.
9V Battery
-
+
To Next Page
Loading...
