7SECTION 2.5
2.5 Rebooting Your Lock
NOTICE
Reboot Lockly in case of dead battery or malfunction. No settings
will be changed and all Access Codes will still be stored within Lockly.
Press and release the reboot button when you want to reboot the lock. Your Lockly will
beep once after reboot. Only reboot when necessary.
To reboot, find the reboot pin hole located on the bottom of the exterior side of Lockly
lock. The reboot button is located in the middle of the two 9V battery backup sockets.
You will need something small such as a paperclip, to press the reboot button. Insert
the
paperclip and press down firmly and let go. Your screen should restart and the
lock
should reboot automatically.
Reboot
To Next Page
Loading...
