3.1 Configuring Access
The Default Access Code is
NOTICE 1 2 3 4 5 6
There are a total of five (5) buttons on the keypad as shown
in the example image to the left. The numbers in each
button may differ than what is shown on your device than
what is displayed here.
To enter your required digit, just simply press the circle
where
your number is shown. You do not need to press
the actual
number as anywhere within the circle will suffice.
The button on the bottom is the OK button. You will be press-
ing this button when you are done entering your Access
Code.
Pair your lock to your smart phone to manage your access codes. Follow the on
screen instructions to complete the setup.
Your new Lockly Access Code can be any combination of 6 to 8 digits. Once a new
Access Code is entered, the Default Access Code of 123456 would be deleted. A maximum
of 33 sets of Access Codes can be stored for use at any given time. To add more than
33 sets of Access Codes, you must delete an existing Access Code before adding a new
code.
There are different types of Access Codes that can be generated using the Lockly App.
Each type of access code have different levels of permission you can select for your
guests, tenants, deliveries, helpers, etc., Get the latest updates on access codes, visit:
www.support.lockly.com/faq/accesscodes/
OK Button
SECTION 3.1 11
To Next Page
Loading...
Need help?
General
