- 72
english
Media
+
Explanation of the adapter settings
The current assignment method for the IP address of
your TV set.
Your current IP address.
Your current subnet-mask IP address.
(only for IP configuration ט manual)
Your manually set gateway IP address.
(only for IP configuration ט manual)
Your manually set first DNS server IP address.
(only for IP configuration ט manual)
Your manually set second DNS server IP address.
The name of your network.
Indicates the MAC address that is built into the hardware
of your TV set’s wired network adapter (LAN).
Indicates the MAC address that is built into the hardware
of your TV set’s wireless network adapter (WLAN).
Gives you information about the current status of your
wireless connection (save settings, connecting, login
failed, access point not found, not connected, connec-
tion established).
Specifies the signal strength as a percentage.
Explanation of the setting possibilities in Network settings menu
(continued)
This menu contains settings which have to be changed
less frequently.
Select Other,
OK call other network settings.
Select desired setting,
or numeric buttons: Perform changes.
Enter characters (procedure same as Rename station,
see page 51).
Host name: Give your TV set a name so that it can be
uniquely identified in the network.
Use proxy server: Indicate whether your network access
is to be direct or via a proxy server.
➠ A proxy server is not necessary for most home net-
works.
➠ Contact your home network administrator if you are
unclear about the proxy server settings.
Proxy server name:
(only available if Use proxy server ט yes)
Indicate the name or IP address of the proxy server used.
Proxy port number:
(only available if Use proxy server ט yes)
Indicate the network port number.
Proxy server requires login:
(only available if Use proxy server ט yes)
Specify whether your proxy server requires a special login.
User name and Password:
(only available if Proxy server requires login
p
yes)
Enter your login data for the proxy server.
MENU: Quit Other network settings menu.
The settings for the network adapter revert back to the
factory settings.
Whilst the settings are reverting back to the factory set-
tings, the TV set must not be switched off!
Other
IP
configuration
IP address
Subnet mask
Gateway
DNS server 1
DNS server 2
Network SSID
MAC address
(TV)
MAC address
(WLAN)
Link status
Link quality
MEDIA MENU
Network settings
Other Reset to factory settings
access
OK
Reset to factory
settings
To Next Page
Loading...
Need help?
General