User Manual
CBX-1 / CBX-2
4.3.4. Drive Back
Note: The drive back function is only active when the optional module
(ACS-CB-PINCH) and squeeze line are connnected. For detailed
information refer to page 4.4!
After the pinch protection function has triggered (squeeze line), the desk
automatically moves in the opposite direction for a pre-defined distance.
4.3.5. Duty Cycle Monitoring
The duty cycle monitoring function forces the control box to stop after a certain on-
time is exceeded (e.g. after 1 min. of continuous operation driving is disabled for the
succeeding 9 min.).
Page 19/29
To Next Page
Loading...