User Manual
CBX-1 / CBX-2
1.8. Safety Instructions
This user manual contains safety instructions to point out possible dangers and
therefore allow a safe operation of the CBX control box. Please consider these safety
instructions unconditionally!
Within this chapter you will find general safety instructions, which do not refer to a
particular procedure. Safety instructions that refer to a particular operation step are
found in the corresponding chapter of this manual In addition to this you find safety
instructions on the device itself.
1.8.1. General Safety Instructions
Note: Carefully read the user manual before you mount/operate the
LogicS control box !
Caution: Do not open this unit! Risk of electric shock is present.
Caution: Do not exceed the duty cycle qouted on the type label!
Caution: Do not operate the CBX control on a mains voltage other than
110V ±6% / 60Hz!
CBX-control boxes are available for other mains voltages as well. In this
case, the above characteristics are not valid. For detailed information
refer to page 24!
Caution: Use only the provided power cord! Check the power cord for
damage before operating the unit. Never operate this unit when the
power cord is damaged
Caution: Unplug the power cord before you plug in / unplug handsets!
Page 7/29
To Next Page
Loading...