41
The trigger that is used to
reactivate the equipment
Yes
The communication protocol
used by the equipment
Analog (PSTN), Digital (DECT)
How to connect to the network? Telephone cable
Note:
If no information is provided, the equipment is considered not to
be networked equipment unless it provides the functionalities of a
router, network switch, wireless network access point (not being a
terminal), hub, modem, VoIP telephone, video phone.
Product Dimension (W x D x H) 114.2 × 110.6 × 205.1 mm
(Handset + Base unit)
93.6 × 92.4 × 194.8 mm (Handset
+ Charging cradle)
Weight 0.873 kg
Dialing Mode Default tone
PBX compatibility:
Timed break recall (ash): adjustable to 100ms (default), 250ms or
600ms
Pause length: 3 seconds
Dialling type: Tone (DTMF, dual tone multi-frequency) or Pulse
(loop disconnect).
Network connection: This equipment is intended to be used in the UK
only.
Operation on other countries’ PSTN termination points cannot be
guaranteed.
To Next Page
Loading...