Crane with tiltable stabiliser legs
1. Raise the stabiliser leg carefully slightly from the
ground.
2. Unlock the stabiliser leg lock (1). Make sure that it
remains in the released position.
WARNING
Do not stand behind the stabiliser leg. Do not touch the stabiliser leg either.
3. Raise the stabiliser leg slowly until the plate touches the bar on the “inside” of the stabiliser leg.
4. Continue raising the stabiliser leg carefully. It will now move backwards and perform a rotary
movement.
5. Stop the operation as soon as the stabiliser leg is almost vertical, lock the stabiliser leg lock (1).
6. If manual operated stabiliser extension: unlock the stabiliser extension with the handle (2) and
retract the stabiliser extension completely.
7. If manual operated stabiliser extension: lock the stabiliser extension with the handle (2).
Ending crane operation
Loglift 96S CE 63
To Next Page
Loading...