Interpreting the Data UTRED-16 User Guide 41
Page information
The current page number and the total number of pages appear on every page.
Marked readings
In the data list, each entry may be marked with one or more of the following symbols,
depending on which event occurred when the reading was taken:
l A + symbol will be shown, if the UTRED-16 was downloaded with LogTag
®
Analyzer
just prior to the reading being taken.
l A * symbol will be shown where an inspection mark has been placed.
l A $ symbol will be shown where readings were paused as a result of a button press.
l A # symbol will be shown where the logger was plugged into a USB port at the time
it would otherwise have taken a reading.
l A % symbol will be shown when the min/max readings were reset.
USB Paused Readings
USB loggers cannot take a reading while plugged into a USB port. A gap is shown in the
graph where the UTRED-16 was plugged in at the time it would otherwise have taken a
reading. The list shows instead of the reading.
Probe Disconnected
A gap is shown in the graph where the UTRED-16's probe was not plugged in at the time it
took a reading. The list shows instead of the reading.
Legend
Shows the symbols for download marks, inspections marks and paused marks if they
appear in the readings.
To Next Page
Loading...