Lombardini ECOWIND 350 ECC - 1 Warnings and General Information; Identification Plate; Directive and Standard References Applied

9
THIS MANUAL IS PROPRIETY OF ECOWIND by LOMBARDINI - ALL FORMS OF REPRODUCTION, PARTIAL OR OTHERWISE, IS STRICTLY PROHIBITED
G
B
Fig. 3
1 - WARNINGS AND GENERAL INFORMATION
1.3. IDENTIFICATION PLATE
The air-conditioning system is manufactured in a European Union state, and therefore complies with the safety
requisites of Machinery Directive 98/37/EC, in force since 23 July 1998.
This conformity is certied by the “CE” mark located on the body of the power unit, inside the front protective casing.
NOTE!
Do not damage or remove the CE identication plate, even when the system is resold (g. 3).
1.4. DIRECTIVE AND STANDARD REFERENCES APPLIED
Legal provisions
Reference Title
P. D. no. 459 of 24.7.96 Implementation of EEC Directive no. 89/392 known as the Machinery Directive
L. D. no. 476 of 4.12.92 Implementation of EEC Directive no. 89/336 regarding Electromagnetic Compatibility (EMC)
Table 1-1
EU Directives
Reference Title
EU Directive no. 98/37 Machinery Directive 89/392/EEC codied 98/37
EU Directive no. 89/336 Electromagnetic Compatibility (EMC)
Directive 2000/2/EC Directive regarding electromagnetic compatibility (EMC) for agricultural and forestry tractors.
Directive 2004/104/EC Directive regarding electromagnetic compatibility (EMC) for motor vehicles and their trailers.
Directive 95/54/EC Directive regarding electromagnetic compatibility (EMC) for motor vehicles.
ECE R10 ECE/UN regulation regarding electromagnetic compatibility for motor vehicles.
Table 1-2