LONCIN LC3000i - Section 4. Disassembly and Service; Troubleshooting; Hard Starting

SECTION 4. DISASSEMBLY AND SERVICE
(TRY AGAIN AFTER A FEW MINUTES)
4-1 Troubleshooting
4-1-1 Hard Starting
(SEE 4-4-1)
(SEE 4-4-1)
(SEE 4-4-2)
(SEE 4-4-2)
(SEE 4-4-2)
(SEE 3-7)
(SEE 4-4-1)
(SEE 4-5-5)
(Replace
(Replace
(SEE 3-6)
(SEE 3-2)
HARD
STARING
FUEL SYSTEM
IGNITION
SYSTEM
COMPRESSION
SYSTEM
(SEE 3-3)
(SEE 4-4-4)
(SEE 3-4)
(ADD FUEL INTO FUEL TANK)
FUEL LEVEL too low
FUEL FILTER clogged
CARBURETOR out of adjustment
AIR FILTER dirty
OIL low
SPARK PLUG GAP incorrect
SPARK PLUG CAP faulty
IGNITION COIL faulty
START SWITCH faulty
OIL ALERT SYSTEM faulty
VALVE CLEARANCE incorrect
CYLINDER HEAD GASKET faulty
CYLINDER HEAD BOLT faulty
VALVE faulty
CYLINDER / PISTON / PISTON RING worn
CAMSHAFT worn
ENGINE FLOODED to much fuel
- 13 -