LONCIN LC3000i User Manual

SECTION 4. DISASSEMBLY AND SERVICE
4-5 Generator
4-5-1 Fuel Tank
DISASSEMBLY/ REASSEMBLY
Gasoline is flammable and explosive,
drain the carburetor and fuel tube before
disassembly, spilled fuel must be wiped off
immediately.
REASSEMBLY:
Make sur
e the passages
are not clogged.
Check for f
uel leakage
after installation.
FUEL COCK
REASSEMBLY:
Make sure that the air vent
hole is clean and
unclogged. Blow with
compressed air if
necessary.
REASSEMBLY:
Check to be sure the
strainer is clean,
undamaged and has no
obstructed mesh before
installation.
FUEL STRAINER
REASSEMBLY:
Wash the tank to remove
dirty sediment, or water,
and dry thoroughly before
installation.
FUEL TANK
REASSEMBLY:
Check whether filter
element is clean and
whether it is damaged.
FUEL TANK CAP
FUEL FILTER
FUEL FILLER RUBBER
HOUSING
ASSEMBLY:
Check for no crack or aged
before assembling, if
necessary, please replace.
Fuel tube
CARBON CONTAINER
- 43 -

LONCIN LC3000i Specifications

General

Brand	LONCIN
Model	LC3000i
Category	Inverter
Language	English