20
14. Now open the Network properties dialog box of
the computer again and select TCP/IP protocol.
15. Change the computer’s IP address, subnet mask,
and DNS Server IP address (provided by your
ISP) back to their original settings.
16. Next, enter the IP address of the Broadband
DSL/Cable Firewall Router as the computer’s
gateway IP address (see Step 1).
17. Finally, restart the computer for new TCP/IP
settings to take effect.
18. Please refer to settings given in this chapter to
continue configuring the Broadband DSL/Cable
Firewall Router.
19. Repeat Step 16 and Step 17 on each computer
located on your LAN.
Once your network and the Broadband DSL/Cable Firewall
Router are both successfully configured, the computers on
your network should be ready to access the Internet using
the Broadband DSL/Cable Firewall Router.
To Next Page
Loading...
Need help?
General
