E-mail Alerts
The Broadband DSL/Cable Firewall Router can setup the
administrator’s e-mail address and the Mail server’s IP. If a
hacker attacks your network, the Firewall Router can
automatically send an e-mail to the administrator. Use the
following procedure to setup this facility:
1. Click Firewall Setup in the left-column. The
sub-menus then appear.
2. Click “E-mail Alerts”, and the box pictured below
will appear.
3. Select “Yes” in ‘Enable E-mail Log Alerts’.
4. Fill in administrator’s e-mail.
5. Fill in mail server’s IP address.
6. Click “Save”, and then click “Apply”.
7. The facility is now set up.
61
To Next Page
Loading...
Need help?
General
