Event Log
The Broadband DSL/Cable Firewall Router can record all
information that you want, including “Hacker attack”,
“Connection from LAN to WAN”, and “Connection from
WAN to LAN”. Use the following procedure to setup this
facility:
1. Click Firewall Setup in the left-column. The
sub-menus then appear.
2. Click “Event Log”, and the box pictured below
will appear.
3. Refresh: Renew current record.
4. Send Log: Send log to administrator.
5. Clear log: Delete log.
6. When the log exceeds memory size, it will
automatically send the log to the administrator,
and then delete it.
62
To Next Page
Loading...
Need help?
General
