40
Microsoft VPN Setup
To set up this device to support Microsoft VPN
(Pass-Through), please follow the instructions below:
1. Please ensure that the VPN server is running. Have
the IP address of this computer ready.
2. Connect to the Firewall Router by using your
browser.
3. Click Advanced Setup in the left-hand column.
4. Click DMZ Software.
5. In the Client PC IP Address field, type the IP
address of VPN server.
6. Click the Save button.
7. Click the Apply button
Note: 1. When accessing the VPN server on your private
network to Internet, the device will forward (pass
through) all incoming VPN requests to the server.
2. Due to the nature of the NAT implemented, only
one user at a time can access the same VPN
server on the Internet through this device. This
means that two private network users cannot
access the same VPN server locate on the public
Internet simultaneously.
3. For details on setting up a VPN client, please refer
to your system’s documentation.
To Next Page
Loading...
Need help?
General
